5 Reasons Your Home’s Water Pressure Is Weak

We’ve all dealt with clogged drains and pipes that are bad enough to call in a plumber. But what happens when the issue isn’t with the water draining but instead with the amount of water actually coming out? The average in-home water pressure is about 40 to 45 pounds per square inch (or PSI). If you feel like you’re dealing with low water pressure, chances are your pressure has slipped below this number.

Between showering, running the dishwasher, and flushing the toilet, American families use an average of 300 gallons of water a day. We tend not to think about where that water comes from or how it comes out of our faucets. Most of us don’t know where to look if the water pressure drops.

We’re here to talk about 10 possible causes for your low water pressure so that you know what to do and, if necessary, who to call. Read on to find out why your house is operating under pressure.

1. The Main House Shutoff Valve Isn’t Open All the Way

If you do find that you’re the only one on the block with low water pressure, it’s time to start checking around your own house for the issue.

It’s important for homeowners to know how to find and shut off their main house shutoff valve. Now we’re going to talk about what happens if it isn’t all the way open.

Unless you’ve had an emergency involving a leak or a burst pipe, you haven’t messed with this valve. It may be located outside, but chances are it’s inside where the main city supply pipe enters your home.

If it has a handle similar to the one you would use to turn on your hose, it needs to be turned counterclockwise as far as it can go. If the handle looks like a lever, the lever needs to be parallel to the pipe. Otherwise, it’s not fully open, which is why your pressure is low.

2. The Water Meter Valve Isn’t Open All the Way

The water meter valve is the second valve controlling the water intake in your house. This valve belongs to the water company, so most residents will never deal with this valve directly. Some of them are quite difficult to reach, especially those that are located underground.

If you’ve had work done on your house recently, especially if that’s when you started to notice your low water pressure, you may want to contact your water company. Chances are, the valve was not opened all the way after the work was complete, and someone will need to go in and open it all the way.

3. The Pressure Regulator is Failing

Not all plumbing is equipped with a pressure regulator. If you don’t have one, then this solution is not for you.

If you do, there’s a test you can try yourself to find out if the pressure regulator is failing to get an accurate read. Attach a water pressure gauge to your outside hose spigot, ideally the one that is closest to your pressure regulator. When you turn the water on, the pressure gauge will give you an immediate read of your water pressure.

If it’s lower than what your pressure regulator is reporting, your issue might be with the pressure regulator. These regulators are designed to adjust the pressure coming from your water supply line to a level that is safe for your pipes. If it’s not reading, it thinks that it’s doing its job when it’s actually letting through a low PSI.

You can replace your pressure regulator on your own, but it’s not a bad idea to call in a plumber, especially if you’re not used to tinkering around with pipes.

4. The Pipes Are Clogged

Believe it or not, clogs don’t just build up beneath drains. They can actually form in the depths of your piping, and even a small clog can gum up the works enough to reduce your water pressure.

Because this kind of clog could be anywhere beneath your house, this is another one of those times where you’re going to want to call a plumber. The last thing you want to do is start pulling pipes apart and not being able to put them back together.

Plus, you may not know what you’re knocking loose or contaminating your pipes with. It’s one thing to put dangerous chemicals down your drain to eat away clogs, although that’s not advisable. It’s another thing to use any questionable or dangerous chemicals in the pipes that are pumping in your drinking water, which is definitely not advisable.

5. The Pipes Are Corroded

How much do you know about your house’s piping? Is it original to the house or was it updated recently? What material is it made from?

Pipes, especially galvanized steel pipes, have an expiration date. In fact, galvanized steel pipes can begin to corrode after only 20 years. Copper pipes are usually good for 50 or more years and brass pipes should be fine for anywhere between 40 and 70 years.

The possibility of corrosion increases if you have an older house. Newer pipes aren’t often made from galvanized steel and their plumbing should be fine for years to come, but older houses that haven’t been modernized may need to be re-piped.

Corrosion may also be an issue if you have added plumbing fixtures to your home, like an extra bathroom or a washing machine, after the house was built. When you add plumbing fixtures to an already complete house, you are generally supposed to enlarge the branch lines of your piping. Otherwise, those portions of your pipes are working overtime and are going to corrode faster.

One last thing about corrosion: you can’t see it from the outside. It’s going to be beneficial to find out how old your plumbing is from the previous homeowners or city records.

What We Can Do to Increase Water Pressure

We always make sure we know what we’re getting ourselves into before we start digging underground or pulling apart your plumbing. We send in our fiber-optic video line to find the problem areas so we know exactly where to go.

While we’re more than happy to replace your pipes, we do offer pipe relining. Pipe relining is a great solution for pipes with internal issues that don’t need to be completely replaced. At a low cost, it’s a great solution for your wallet, too.